| Printer Specifications |
| Print Method: |
Thermal inkjet; Pigment ink |
| Print Resolutions: |
Up to 4800 dpi |
| Print Speeds: |
Draft Mode: 4” per second
Normal Mode: 1.3” per second
High Quality Mode: 0.54” per second |
| Print Head: |
Replaceable Print Head |
| Inks: |
Individual ink cartridges for Cyan, Magenta, Yellow and Black |
| Colors: |
16.7 million |
| Color Matching: |
Z-Color™ Color Matching Software |
| Max. Print Width: |
8.25" (210mm) |
| Media Width: |
8.375" (213mm) |
| Media Types: |
Roll-fed pressure-sensitive labels, or roll-fed tags |
| Media Sensing: |
Moveable see-through sensor for die-cut labels;
reflective sensor for labels and tags with black stripe;
can use continuous and pre-printed labels and tags |
| Supply Roll: |
6" (152mm) maximum diameter on 3" (76mm) core. |
| Ink Level Warning: |
Calculates actual number of prints remaining based upon ink usage of graphics being printed (patent-pending) |
| Indicator Lights: |
Power, Pause, Ink |
| Controls: |
Pause, Feed, Unload, Cancel |
| Operating Systems: |
Windows® 7/8/10+ |
| Data Interface: |
USB 2.0; External Control Port |
| Label Design Software: |
BarTender UltraLite Primera Edition included. Can also be used with most other popular label design and graphics software programs |
| Electrical Rating: |
12VDC, 5.0A |
| Power Requirements: |
100-240VAC, 50/60 Hz, 1.7A |
| Certifications: |
UL, UL-C, CE, FCC Class A |
| Weight: |
45 lbs. (20.4 kg) |
| Dimensions: |
19.5"W x 10.2"H x 20.5"D
(495mmW x 259mmH x 521mmD) |
| Connectivity: |
Hi-Speed USB 2.0 |
Included:
|
Bartender Ultralite software for Windows, 4”X3” Tuffcoat™ Extreme White Polyester starter roll and starter CMYK ink set. |
| Label Specifications |
| |
Max |
Min |
| Label width: |
8.25" (209.6mm) |
0.5" (12.7mm) |
| Liner/media width: |
8.375" (212.7mm) |
1.5" (38.1mm) |
| Label height/length: |
24" (609.6 mm) |
0.5" (12.7mm) |
| Gap between labels: |
10" (254mm) |
0.1" (2.5mm) |
| Width of thru-hole opening: |
0.5" (12.7mm) |
0.25" (6.4mm) |
| Distance from edge of media to edge of thru-hole: |
2.25" (57mm) |
0.2" (5.1mm) |
| Reflective/Black Mark Width*: |
N/A |
0.1" (2.54mm) |
| Max Outer Diameter (OD): |
6"(152.4mm) |
N/A |
| Inner Core Diameter (ID): |
3" (76.2mm) |
3" (76.2mm) |
| Total Thickness (Liner + Label)**: |
0.010” (10 mil) |
N/A |
| Distance from edge of media to edge of label: |
Printer driver assumes 2 mm gap. However, this is adjustable via the left margin offset. |
Labels should be rated as "inkjet printable" and have a top coat which is capable of accepting pigment ink.
* The Reflective/Black Mark should be opaque to infrared light. The mark should be between the labels. The end of the mark should correspond with the beginning of the label.
** This is the recommended maximum. There are two factors that determine whether the printer will accept any particular stock thickness.
